| Simpler system wiring |
All wiring returns to the clearly labelled connector strip making installation and diagnostics much easier. |
| Substantial labour savings |
No need for external relays and clear labelling makes wiring a simple “plug & play” procedure |
| Suitable for use with most heat sources |
Including oil, gas, solid fuel and geothermal. Auxiliary relays allow easy interconnection of solid fuel with other heat sources allowing for necessary heat dissipation. |
| Works with most thermostats |
Including thermostats which are rated for 230V. Systemlink recommends the HomeStat. |
| Simplifies wiring of multiple heating zones |
Allows wiring of zones without creating problems of ‘backfeed’ between the zones. Allows multiple zones to switch on the boiler without the need for extra relays. |
| Pre-fused power supply with independently fused zones |
If there is a problem with an individual zone, only that zone is affected. The rest of the system functions normally. |
| Clearly identified terminals for clock and thermostat connections |
Makes wiring a simple case of connecting timeclocks into the terminals labelled ‘clock’ and thermostats into the terminals labelled ‘stat’. |
| Built in lights to indicate correct operational status and assist system fault finding |
LEDs indicate when a zone is operational. External controls can be bypassed which accelerates identification of problems. |
| Fully complies with new building regulations |
Building regulations state that all buildings greater than 100m2 in area must be zoned. Homezone combined with ZoneAlone or SystemZone provides the easy solution. |
| Suitable for use with both motorised valves or pumped systems |
Including oil, gas, solid fuel and geothermal. Auxiliary relays allow easy interconnection of solid fuel with other heat sources allowing for necessary heat dissipation. |
| Backlit display |
Easy to read, fully illuminated display |
| Automatic summer time adjustment |
For convenience. No need the adjust the programme. |
| Boost and advance features |
Convenient manual operation which can be applied separately to each zone. |
| Pre-programmed zone timings |
Saves the installer even more time. |
| Stand-by button |
Heating system can be shut down in an instant while still allowing the domestic hot water to follow its normal program.
|
| Internal thermostat |
No need for an additional thermostat in the area where the HomeZone programmer is installed. |
| Built-in frost protection |
Uses the internal thermostat. Will automatically switch on when internal temperature falls to plus five degrees centigrade. |
| Holiday mode |
Puts the system on pause when the homeowner is on holidays, with frost protection still operating. |
| Installer mode |
Pre-programmed installer mode makes installer commissioning easy. |
| Stylish contemporary design |
Programmer can be sited in living or sleeping areas. |
| Intuitive to use |
No need for a manual |
| Battery back-up |
Ensures settings are saved in the event of a loss of power |
 |
|
